Name: Relax pH Minus 1.5kg - www.smartpoolservices.co.uk
SKU: RSPA15S
Price: 8.99 GBP
Availability: InStock

Relax pH Plus 1kg

1kg Relax Spa pH Plus

pH Plus is used to increase the pH of your spa water
Maintaining the correct pH in your spa water is essential. Failure to do so will result in bather discomfort and damage to your spa
Ideal conditions are between 7.2 and 7.6
Tes the pH of your spa water at least twice per week and before every use

5kg Relax pH Plus

pH Plus

Directions for use

Test the pH of your pool or spa daily. The pH of your water should be maintained between 7.2 and 7.6.
If you test kit reading indicates that the pH of your pool or spa is lower than 7.2 add pH Plus at a rate of 10gm per 1000 litres of water (e.g if your pool contains 7 litres of water add 70gm of pH Plus). One heaped teaspoon holds approximately 7gm of pH Plus.
Pre-dissolve in a clean plastic bucket filled with water.
Ensure that circulation system is running when adding pH Plus.
Slowly pour solution into water immediately above pool or spa return inlet.
Test pH daily and repeat dose until test reading indicates pH has been increased to 7.4,
Never add product when the pool or spa is being used; do not allow pool or spa to be used for 30 minutes after adding pH plus.

1kg Relax Spa Hardness Plus

Your spa water needs to contain a Calcium Hardness of between 200 parts per million (ppm) and 300 ppm
Low Calcium (soft water) will cause expensive damage to your spa equipment
This is particularly important if your tap water is soft water (low in Calcium)
Test the Calcium Hardness immediately after you have drained and refilled your spa water and at least once per week