Water Balancers
-
5kg Relax pH Plus
Original price was: £20.49.£16.99Current price is: £16.99. inc. vatAdd to cartpH Plus
Directions for use
- Test the pH of your pool or spa daily. The pH of your water should be maintained between 7.2 and 7.6.
- If you test kit reading indicates that the pH of your pool or spa is lower than 7.2 add pH Plus at a rate of 10gm per 1000 litres of water (e.g if your pool contains 7 litres of water add 70gm of pH Plus). One heaped teaspoon holds approximately 7gm of pH Plus.
- Pre-dissolve in a clean plastic bucket filled with water.
- Ensure that circulation system is running when adding pH Plus.
- Slowly pour solution into water immediately above pool or spa return inlet.
- Test pH daily and repeat dose until test reading indicates pH has been increased to 7.4,
- Never add product when the pool or spa is being used; do not allow pool or spa to be used for 30 minutes after adding pH plus.
-
5kg Relax Total Alkalinity Plus
Original price was: £23.99.£19.99Current price is: £19.99. inc. vatAdd to cartTotal Alkalinity Plus
Directions for use
- The total Alkalinity (T.A.) of pool and spa water should be maintained between 80 and 140ppm (parts per million). Add Total Alkalinity Plus when Total Alkalinity of water needs to be increased.
- Use a test kit to determine Total Alkalinity of water.
- Add 16g (2 heaped teaspoons) per 1000 litres to increase total Alkalinity by approx. 10ppm. If your pool holds 40,000 litres of water you will need to add 640g of total Alkalinity Plus to increase the T.A. by 10ppm.
- Always pre-dissolve in a plastic bucket full of water before adding to the pool water.
- Ensure that circulation system is running before pouring the solution into the water immediately above the return inlet.
- Never add product when pool/spa is being used. Allow 15 minutes before using pool/spa.
- After 24 hours test and repeat dose if required.
-
7kg Relax pH Minus
Original price was: £24.99.£20.99Current price is: £20.99. inc. vatAdd to cartpH Minus
Directions for use
- Test the pH of your pool or spa water daily. The pH of your water should be maintained between 7.2 and 7.6.
- If your test kit reading indicates that the pH of your pool or spa water is higher than 7.6 add pH minus at a rate of 10gm per 1000 litres of water (e.g. if your pool contains 7000 litres of water add 70gm of pH Minus). One heaped teaspoon holds approximately 9gm of pH Minus.
- Pre-dissolve in a clean plastic bucket filled with water.
- Ensure that circulation system is running when adding pH Minus.
- Slowly pour solution into water immediately above pool or spa return inlet.
- Test pH daily and repeat dose until test reading indicates pH has been reduced to 7.4
- Never add product when pool or spa is being used; do not allow pool or spa to be used for 30 minutes after adding pH Minus.
-
Relax Hardness Plus 1kg
Original price was: £10.49.£8.99Current price is: £8.99. inc. vatAdd to cart1kg Relax Spa Hardness Plus
- Your spa water needs to contain a Calcium Hardness of between 200 parts per million (ppm) and 300 ppm
- Low Calcium (soft water) will cause expensive damage to your spa equipment
- This is particularly important if your tap water is soft water (low in Calcium)
- Test the Calcium Hardness immediately after you have drained and refilled your spa water and at least once per week
-
Relax pH Minus 1.5kg
Original price was: £10.99.£8.99Current price is: £8.99. inc. vatAdd to cart1.5kg Relax Spa pH Minus
- pH Minus is used to reduce the pH of your spa water
- Maintaining the correct pH in your spa water is essential. Failure to do so will result in bather discomfort and damage to your spa
- Ideal conditions are between 7.2 and 7.6
- Test the pH of your spa water at least twice per week and before every use
-
Relax pH Plus 1kg
Original price was: £9.99.£7.99Current price is: £7.99. inc. vatAdd to cart1kg Relax Spa pH Plus
- pH Plus is used to increase the pH of your spa water
- Maintaining the correct pH in your spa water is essential. Failure to do so will result in bather discomfort and damage to your spa
- Ideal conditions are between 7.2 and 7.6
- Tes the pH of your spa water at least twice per week and before every use
-
Relax Spa No Foam 1kg
Original price was: £10.49.£8.99Current price is: £8.99. inc. vatAdd to cart1kg Relax Spa Hardness Plus
- Your spa water needs to contain a Calcium Hardness of between 200 parts per million (ppm) and 300 ppm
- Low Calcium (soft water) will cause expensive damage to your spa equipment
- This is particularly important if your tap water is soft water (low in Calcium)
- Test the Calcium Hardness immediately after you have drained and refilled your spa water and at least once per week
-
Relax TA Plus – 1kg
Original price was: £11.99.£8.99Current price is: £8.99. inc. vatAdd to cart1kg Relax Spa Total Alkalinity Plus
- Total Alkalinity Plus is used to increase the Alkalinity of your spa water
- Spa water tends to lose Total Alkalinity (TA) within days of you filling your spa with fresh water
- Low TA will result in damage to your spa equipment, pH fluctuation and bather discomfort
- Ideal levels are between 100 parts per million (ppm) and 140 ppm
- Test the Alkalinity of your spa water at least twice per week, more often if you are located in a soft water area
